Hot Products
Chinese Users foreign users
Home Company Profile Hot Products Product Info Contact Us
   
<%for i=1 to rs.pagecount%> <%next%>
Timers
Time Recorder
My First Clock
4018 Garden Aqua Timer
4018 Garden Aqua Timer
Designed for outdoor use only¡¡
Turn off faucet if unit is not going to be used for
Designed for clean water use only¡¡
an extended period.At the end of the season,
Designed for residential use only ¡¡
turn off the faucet and remove the unit

4018
Garden Aqua Timer

Programming Your Timer
1)TO START - Turn the Dial to the ¡°Off¡± position and press the ¡°Enter¡± button.
2)SET THE TIME-The ¡°Set Time¡±light will start flashing Yellow .Rotate the Dial to the nearest hour(in the yellow band)and press the¡°Enter¡± button.
3)SET THE START TIME-The¡°Start Time¡± light will be flashing yellow .Rotate the Dial to the nearest hour(in the yellow band) and press the¡°Enter¡±button.
4)SET THE WATERING FREQUENCY-The¡° Frequency¡±light will start flashing red .Rotate the Dial to the desired setting (in the red band),as described below and press the ¡°Enter¡±button.
 
  5)SET THE DURATION-The¡°Duration¡± light will start flashing green.Rotate the Dial to the required number of minutes (in the green band )and press the¡°Enter¡± button.Leave the Dial set to the desired number of minutes.
In case of a mistake of incomplete programming, you have to finish all five steps and then start the program again with step.1
  TO MANUALLY TURN WATER ON OR OFF
1).Turn the dial to ¡°On¡± or ¡°Off¡±, to manually control the water.The timer will automatically turn off the water after 30 minutes.
2).To return to the program,rotate the dial to the desired duration(green band)and press the ¡°Enter¡± button.
OPERATING TIPS
1)Replace batteries at the beginning of every watering season.
2)Replace battery if you will be on vacation or away for an extended period.
3)Do not use rechargeable batteries.
4)Don t expose the timer to temperatures less than 32 F(0 C)
5)Be careful moving the hose.Hard pulls may damage the faucet connection.
6)Clean filter washer regularly to prevent clogging.
7)To prevent corrosion, remove batteries when unit is not in use for extended periods of time.
8)Use only fresh alkaline batteries.
9)The timer can be programmed and then hooked up to the faucet.
FREQUENTLY ASKED QUESTIONS
Q:If I ts going to rain,can I temporarily suspend the watering program?
A:Yes,rotate the dial to¡°Off ¡±to disablethe program.
Rotatethe dial to the desiredduration and pressthe ¡°Enter ¡±button whenyou want to reactivate the program.
Q:How can I change just the watering duration?
A:Rotate the dial to the desired duration and press the¡° Enter¡± button.
Q:Why is a light flashing on the front panel?
A:The unit needs an input. Set the dial to any setting In the color band corresponding to the color of the light and press the ¡°Enter¡±button.Repeat until no lights are flashing.Then follow the 5 steps under programming the timer.
Q:Why are all the lights on the front panel flashing?
A:The battery needs to be replaced.
Q:I am programming my timer at 8:00 a.m. On Monday morning.I set the start time to 6:00 a.m.and the frequency to three days.When will the watering begin?
A:In this instance, watering will begin Thursday morning at 6:00 a.m.and repeat every three days after that.

Address: NO. 800 MO GAN SHAN ROAD, HANGZHOU, ZHEJIANG, P.R.CHINA

Tel: 86-571-88092441, 88097646, 88097647 Fax: 86-571-88092442 Email: eil@mail.hz.zj.cn